Back
Learn more about our
DN110 SDR13.6 Polyethylene Pipe White Telco Co-Extruded White X 100M
TTCX13110100
Overview
Product Properties
Size
110MM
Rating
SDR13.6
Length
100M
Primary Material
POLYETHYLENE
UOM
COIL
Joint Type
Electrofusion, compression, butt-weld, mechanical
Colour
White coating
Coating Specification
White
Allowable Operating Temperature - Degrees
Refer Page 3_Table 2 | https://www.iplex.com.au/assets/Uploads/dc73cc0a04/POLIplex-PE-Pipes-Fittings-Technical-Guide.pdf
Allowable Operating Pressure - 20 Degrees Celsius
1250 kPa @20℃
Minimum Radius of Curvature
21 (x DN) Ref: POP202 Nov2016
Unprotected UV Exposed
2 years in accordance with AS/NZS 2033:2008
Maximum Support Spacing of Pipe Graded
Refer Iplex Sales Engineer
Maximum Support Spacing of Pipe Vertical
Refer Iplex Sales Engineer
Industry Specific Names
poly pipe, PE, polythene, polyethylene pipe, HDPE
Mechanical Properties
Ultimate Tensile Strength
N/A
Yield Strain
10%
Yield Stress
25 MPa
Compressive Strength
32MPa
Tensile Modulus
900 MPa
Hardness Shore D
63
Poissons Ratio
0.4
Design Stress
8 MPa
Ring Bending Modulus - 3mins
950MPa
Ring Bending Modulus - 50yrs
260MPa
Thermal Properties
Coefficient of Thermal Expansion
1.8 x 10-4/℃
Thermal Conductivity
0.38W/m.K
Specific Heat
1.9 kJ/kg.K ℃
Vicat Softening Temperature
116℃
Flammability
Supports combustion, will burn when sufficient heat and oxygen are provided
Fire Index - Ignitability
13
Fire Index - Smoke Developed
3
Fire Index - Spread of Flame
7
Fire Index - Heat Evolved
6
Dimensions
Size
110MM
Inner Diameter
93.3mm
Weight
265kg
Wall Thickness
8.6mm
Standards & Accreditations
Product Standard
Manufactured to the dimensions of AS/NZS 4130
POP Documents
PIPA Guidelines & Notes (iplex.com.au)
Learn more about our
Electrical and Telecommunication products
Complimentary products you may be interested in...
Want more information?
Browse all products
Need help?
To speak with an Iplex sales & service team member