RACCORD
At Iplex we strive to deliver future focused products and solutions that provide long term value to our customers and stakeholders. The RACCORD PLAST brand has a reputation as a high-quality fitting that has been distributed into the Australian market for over 20 years.
Applications
Applications
Raccord Plast are an Italian manufacturer and their large bore fittings have been primarily used for swimming pool and irrigation applications.
Material Options
Material Options
Thermal Properties
| Property | Value & Unit |
| Max Continuous Service Temperature | 50°C |
| Specific Heat | 1045 J/kg/°C |
| Thermal Conductivity | 0.138-0.150 W/m/°C |
| Coefficient of Thermal Expansion | 7 x 10-5 / °C |
| Vicat Softening Temperature | Approx. 80°C |
PVC-U pipe is non-conductive and cannot be used for earthing electrical equipment.
| Property | Value & Unit |
| Volume Resistivity | 1016 ohm.cm (60% RH) |
| Surface Resistivity | 1013 - 1014 ohm |
| Power Factor (at 20°C) | 0.015 - 0.020 |
| Dielectric Constant (at 25°C) | 3.4 - 3.6 (60 Hz) |
Temperature Effects
PVC-U material is suitable for service temperatures between 0°C and 50°C, it's self-extinguishing and does not support combustion when the source of ignition is removed.
PVC-U material should not be used for continuous service temperatures above 50°C, as deformation of the pipe may result.
Impact Strength
PVC-U pipes and fittings have good impact resistance, however at very low temperatures (eg. Below 5°C) the impact resistance of PVC-U materials is reduced. Hence, when installing PVC-U at low temperatures extra care should be taken when handling and inserting.
PVC-U pipes are however installed in some of the coldest regions of Europe and North America in large quantities without difficulty.
Chemical Resistance
PVC-U sewer pipes have high resistance to a wide range of chemical reagents. Such resistance, however, is a function of temperature, concentration and pressure.
In general, PVC-U is suitable to convey strong acids, alkalis and aqueous solutions (except those which are strongly oxidising), aliphatic hydrocarbons, fluorides, photographic and plating solutions, brine, mineral oils, fats and alcohols. The suitability of a pipeline for conveying a certain chemical will depend on such factors as the concentration of the chemical in the fluid to be conveyed, temperature, flow rate, the presence of pockets or "dead spots" in the pipeline and other factors.
PVC-U materials should not be used with aromatic or chlorinated hydrocarbons, ketones, esters and ethers.
Product Details
Product Details
Standards and Approvals
The Raccord fittings are manufactured with dimensions in accordance with Australian Standards AS/NZS1477.
Colour and Markings
The Raccord fittings are manufactured in a Dark Grey Colour.
Joint
|
Product Code |
Product Type |
Nominal Size |
PN Rating |
|
P00510200150 |
Reducing Bush |
200x150 |
PN10 |
|
P00510225150 |
Reducing Bush |
225x150 |
PN10 |
|
P00510225200 |
Reducing Bush |
225x200 |
PN10 |
|
P00510250150 |
Reducing Bush |
250x150 |
PN10 |
|
P00510250200 |
Reducing Bush |
250x200 |
PN10 |
|
P00510250225 |
Reducing Bush |
250x225 |
PN10 |
|
P00508300150 |
Reducing Bush |
300x150 |
PN8 |
|
P00508300200 |
Reducing Bush |
300x200 |
PN8 |
|
P00508300225 |
Reducing Bush |
300x225 |
PN8 |
|
P00508300250 |
Reducing Bush |
375x250 |
PN8 |
|
P00505375250 |
Reducing Bush |
375x250 |
PN5 |
|
P00505375300 |
Reducing Bush |
375x300 |
PN5 |
|
P00610200 |
End Cap |
|
PN10 |
|
P00710200 |
Coupling |
200 |
PN10 |
|
P00710225 |
Coupling |
225 |
PN10 |
|
P00710250 |
Coupling |
250 |
PN10 |
|
P00708300 |
Coupling |
300 |
PN8 |
|
P00705375 |
Coupling |
375 |
PN5 |
|
P00810200150 |
Reducing Coupling |
250x150 |
PN10 |
|
P00810225200 |
Reducing Coupling |
225x200 |
PN10 |
|
P00810250200 |
Reducing Coupling |
250x200 |
PN10 |
|
P00810250225 |
Reducing Coupling |
250x225 |
PN10 |
|
P00808300150 |
Reducing Coupling |
300x150 |
PN8 |
|
P00808300200 |
Reducing Coupling |
300x200 |
PN8 |
|
P00808300225 |
Reducing Coupling |
300x225 |
PN8 |
|
P00805375250 |
Reducing Coupling |
375x250 |
PN5 |
|
P00805375300 |
Reducing Coupling |
375x300 |
PN5 |
|
P01010200 |
Elbow |
200 |
PN10 |
|
P01010225 |
Elbow |
225 |
PN10 |
|
P01010250 |
Elbow |
250 |
PN10 |
|
P01008300 |
Elbow |
300 |
PN8 |
|
P01005375 |
Elbow |
375 |
PN5 |
|
P01310200 |
Elbow |
200 |
PN10 |
|
P01310225 |
Elbow |
225 |
PN10 |
|
P01310250 |
Elbow |
250 |
PN10 |
|
P01308300 |
Elbow |
300 |
PN8 |
|
P01305375 |
Elbow |
375 |
PN5 |
|
P01605375S |
Stub Flange |
375 |
PN5 |
|
P01605375R |
Backing Ring |
375 |
PN5 |
|
P01610150 |
Backing Ring |
150 |
PN10 |
|
P01610200 |
Backing Ring |
200 |
PN10 |
|
P01610225 |
Backing Ring |
225 |
PN10 |
|
P01608250 |
Backing Ring |
250 |
PN8 |
|
P01608300 |
Backing Ring |
300 |
PN8 |
|
P01910200200 |
Equal Tee |
200 |
PN10 |
|
P01910250250 |
Equal Tee |
250 |
PN10 |
|
P01908300300 |
Equal Tee |
300 |
PN8 |
|
P01904375375 |
Equal Tee |
375 |
PN4 |
|
P01910200150 |
Reducing Tee |
200x150 |
PN10 |
|
P01910250150 |
Reducing Tee |
250x150 |
PN10 |
|
P01910250200 |
Reducing Tee |
250x200 |
PN10 |
|
P01908300150 |
Reducing Tee |
300x150 |
PN8 |
|
P01908300200 |
Reducing Tee |
300x200 |
PN8 |
|
P01904375300 |
Reducing Tee |
375x300 |
PN4 |
|
P01910225225 |
Equal Tee |
225 |
PN10 |
Need help?
To speak with an Iplex sales & service team member